info@eoexport.com

+86-024-31140175

Product Categories
Contact Us

Office Mob: +8618002480485

Office Tel: +86-024-31140175

Office Fax: +86-024-22845391

Email: info@eoexport.com

Home > News > Content
Mining Stone Ore Hammer Crusher Nov 14, 2017

Basic Info

  • Model NO.: PCF

  • Motor Type: DC Motor

  • Application: Mine

  • Outlet Size: 150-300mm

  • Condition: New

  • The Maximum Feed Size: 18-450mm

  • Transport Package: N/a

  • Origin: Tangshan, Hebei

  • Type: Hammer Crusher

  • Motor Power: 280kw

  • Materials: Fine Sandstone

  • Inlet Size: 900×1200mm

  • Model: Pcf135

  • Specification: PCF135

  • HS Code: 8474209000

  • Product Description


Hammer crusher features&advantages:

1. High capacity and low power consumption; 

2. Uniform particle size with high crushing and crushing ratio;

3. Simple structure; Easy operation

4. Low investment.
5. Perfect services.



Hammer crusher working principle:

Hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part, which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out.

The rotors consist of turn plates, pin shafts, and hammers which are grouped regularly in the main shaft. The main unit drives the main shaft through the motor and triangle belts, which, in turn, rotates the rollers. Large materials entering the crusher through the feed inlet are firstly crushed by the high-speed hammers, and then thrown fiercely to the support iron for further crushing.

Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. To avoid the plugging of the crusher, the proportion of water for the crushing materials is no more than 20%.


 

ModelMax. Feed Size
( mm )
 
Spindle revolutions(r/min)
Output size (mm)Capacity
(t/h)
 
Power
(KW)
PCF120100-200870≤ 2050-9055
PCF135100-200870≤ 2060-10075-90
PCF150100-200880≤ 2090-120110-132
PCF180100-200
 
725≤ 20100-150150
PCF210100-200725≤ 20110-180220
PCF240100-300600≤ 20160-240320